Motor Grader GR135
1.The GR135 adopts a Dongfeng Cummins 6BT5.9-C130-II turbocharged diesel engine, which has a large output torque and power reserve factor and low fuel consumption.
2.The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3.Rear axle main drive is equipped with “NO-SPIN” without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
4.The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
5.The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.
6.Optional auto-leveling system, front scarifier, front blade, rear ripper, tubeless tire
|
Description |
unit |
specification |
|
|
GR135 |
|||
| Basic parameters | Model |
|
6BT5.9-C130-II |
| Rated power |
KW |
97 |
|
| Rated speed |
r/min |
2200 |
|
| Overall dimension(standard) |
mm |
8015x2380x3050 |
|
| Operating weight(standard) |
kg |
11000 |
|
| Tire specification |
|
17.5-25 |
|
| Ground clearance(front axle) |
mm |
515 |
|
| tread |
mm |
2020 |
|
| Space of front and rear axles |
mm |
5790 |
|
| Space of middle and rear wheels |
mm |
1529-1553 |
|
| Performancespecification | Traveling speed forward |
Km/h |
5,8,13,20,30,42 |
| Traveling speed reverse |
Km/h |
5,13,30 |
|
| Traction force |
KN |
61.3 |
|
| Max.gradeability |
% |
20 |
|
| Tire inflation pressure |
kPa |
300 |
|
| Working system pressure |
MPa |
16 |
|
| Transmission pressure |
MPa |
1.3-1.8 |
|
| Operation specification | Max.steering angle of front wheel |
0 |
±49 |
| Max.slant angle of front wheel |
0 |
±17 |
|
| Max.oscillating angle of front axle |
0 |
±15 |
|
| Max.oscillating angle of equilibrium box |
0 |
±16 |
|
| Max.steering angle of frame |
0 |
±27 |
|
| Min.turning radius |
m |
6.6 |
|
| blade | Max.lifting height |
mm |
450 |
| Max.cutting depth |
mm |
500 |
|
| Max.tilt angle |
0 |
90 |
|
| cutting angle |
0 |
28-70 |
|
| Rotation angle |
0 |
360 |
|
| Length x height |
mm |
3660×610 |
|
| Oil filling | Coolant |
L |
50 |
| Fuel tank |
L |
280 |
|
| Engine |
L |
18 |
|
| Transmission |
L |
26 |
|
| Equilibrium box |
L |
46 |
|
| Drive axle |
L |
28 |
|
| Hydraulic oil |
L |
96 |
|
